carry water type mold tempareture machine
Mold automatic temperature control machine features
The thermostat adopts Japanese and Italian (P.I.D.) touch mode internal storage, automatic calculation, accurate and reliable control within ± 2 ° C, saving more than 35%. Two-mode electric heating tubes can be used alone or together. Heating and cooling time is fast and the temperature is stable. Electric heating cylinder, etc. are made of stainless steel The safety protection and fault indication system is perfect. Imported advanced components are used for a long period of time. Japanese process system design, easy operation and maintenance
Device parameters:
| Model | Heating Medium |
Maximum temperature |
Electrothermal power |
pump power |
Pump flux |
Pump maximum pressure |
Cooling mode |
Outline size |
weight |
| unit | ℃ | Kw | Kw | L/min | Kg | mm | Kg | ||
| NTCW-6L | water | 120 | 6 | 0.37 | 30 | 3.8 | Direct cooling |
735*310*540 | 30 |
| NTCW-9L | water | 120 | 9 | 0.37 | 30 | 3.8 | Direct cooling |
735*310*540 | 30 |
| NTCW-12L | water | 120 | 12 | 0.75 | 50 | 4.8 | Direct cooling |
735*310*540 | 50 |
| NTCW-24L | water | 120 | 12*2 | 2.2 | 110 | 6 | Direct cooling |
1100*600*600 | 110 |
| NTCW-36L | water | 120 | 18*2 | 2.2 | 110 | 6 | Direct cooling |
1100*600*600 | 110 |
| NTCW-50L | water | 120 | 25*2 | 3.75 | 200 | 6 | Direct cooling |
1350*700*700 | 200 |
The above parameters are subject to change without notice.
